Proxxon 28690 MIS 1 Micro Screwdriver with 16 bits

Proxxon 28690 MIS 1 Micro Screwdriver with 16 bits Review

Proxxon 28690 MIS 1 Micro Screwdriver with 16 bits Feature

• 79 inch flexible cord ensures easy mobility
• Rear mounted metal hook for use with optional balancer FZ300, number 28699

No need for compressed air! The easier, quieter and environmentally friendly way to drive screws. The three stage planetary gearbox offers a reduction ratio of 93:1, yielding the ideal speed of 200 - 250 rpm. The clutch is adjustable in the range from 3 in-lbs to 9 in-lbs in 5 steps. Tightening torques can be selected precisely. The sixth stage bypasses the clutch and yields approx. 18 in-lbs. An ideally positioned rocker switch provides on/off/reverse. Fibreglass reinforced nylon lends high impact resistance to the housing. A chuck facilitates acceptance of all bit shanks, including 1/4". The 79" flexible cord ensures perfect mobility. Operates off 12-16V DC. The rear mounted metal hook is practical for use with the optional balancer. Micro Screwdriver MIS 1 The tool is also available by itself, but without AC adapter and insert bits NO 29 004 . 16 Inserts of chrome-molybdenum with 9/64" shanks. Featuring: flat bits 1/8" x 1/16", 1/64" x 5/64" and 1/64" x 7/64". TX T 6, T 8 and T 10, Phillips sizes 0 and 1, Allen keys 1.5, 2.0 and 2.5 mm and 3.0, 3.5, 4.0, 4.5 and 5.0 mm nut drivers. Altogether in practical holder with holes for all these sizes to be stored in. Suggestions for industrial use: The MIS 1 is the ideal tool for torques up to 18 in-lbs. It is preferred over the compressed air types because of less costly running expenses, but also for its quietness and cleanliness. The highly flexible cable makes it easy to use and together with the optional Load Balancer FZ 300 it is optimal for use in production lines.NO 28690 The tool comes in a complete set, 120V AC adapter as power source and 16 bits of chrome molybdenum with shanks in 9/64", featuring: flat bits 1/8" x 1/16", 1/64" x 5/64" and 1/64" x 7/64". TX T 6, T 8 and T 10, Phillips sizes 0 and 1, Allen keys 1.5, 2.0 and 2.5 mm and 3.0, 3.5, 4.0, 4.5 and 5.0 mm nut drivers. Proxxon tools come with a 2 year factory warranty.